90° flat duct bend element (male) in horizontal configuration
Aerodynamically optimised design to minimise pressure loss and maximise air flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
In stock
£59.56
90° flat duct bend element (male) in horizontal configuration
Aerodynamically optimised design to minimise pressure loss and maximise air flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
Vertical 90° bend with large radius for ducting behind the backpanel/furniture (designed for a 70cm worktop depth)
90° flat duct bend component (male) in vertical configuration with wide radius
Aerodynamically optimised design to minimise pressure loss and maximise air flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
In stock
£44.99
Vertical 90° bend with large radius for ducting behind the backpanel/furniture (designed for a 70cm worktop depth)
90° flat duct bend component (male) in vertical configuration with wide radius
Aerodynamically optimised design to minimise pressure loss and maximise air flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
Aerodynamically optimized for minimised pressure losses and maximised flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
In stock
£51.57
Straight flat-duct tube element (1,000mm. male)
Aerodynamically optimized for minimised pressure losses and maximised flow rate. Easy-to-cut & easy-to-connect via the female connector sleeve element.
The element complies with the Needle Flame Test (according to IEC 60695-11-5) & the V2 flammability class (according to UL94).
Diffusor element that can be directly connected to the flat duct elements and that spreads the outflowing air in the plinth area for partly ducted recirculation configurations.
The diffusor can also be directly connected to air outlet element with an adhesive tape for fully ducted recirculation configurations
In stock
£60.60
Diffusor element that can be directly connected to the flat duct elements and that spreads the outflowing air in the plinth area for partly ducted recirculation configurations.
The diffusor can also be directly connected to air outlet element with an adhesive tape for fully ducted recirculation configurations
Credit subject to status and affordability. Terms & Conditions Apply. Donaghy Bros DEV are a credit broker not a lender and are Authorised and Regulated by the Financial Conduct Authority. Credit is provided by Novuna Personal Finance, a a division of Mitsubishi HC Capital UK PLC Authorised and Regulated by the Financial Conduct Authority.